To determine how much paint your house needs, measure the house's perimeter. Then multiply that figure by the height, excluding gable ends. Take the measurements with a steel tape measure, or reel out a ball of twine around the house and mark and measure the twine. If you will use a different paint on your home's trim, subtract 21 square feet for every door and 15 square feet for each typical window. Divide the final figure by the square-foot coverage specified on the can of paint to determine the number of gallons you will need for one coat.
If you hire a contractor for a painting job, you’ll want some assurances in the form of guarantees or warranties. Knowing the importance of warranties, some companies even give unrealistically long warranties such as 10 years, 20 years or even lifetime warranties. The sad fact is that most of these companies will be out of business long before their warranties expire. So what is a realistic warranty that you can trust? Here’s what you should look for in a great warranty:
Professional residential and commercial painting services in Elk Grove and house painting in Sacramento. Family owned and operated for over 25 years, we are dedicated to not only conducting ourselves in a professional manner but humbly recognize that we are working on our customers’ most prized material possession. From picking out your colors to the final walk through, we are there for you from start to finish. We are PaintRite Pros.
Once you have removed all the loose paint, you should apply an appropriate primer to some of the distressed areas, especially if your paint-removal system has exposed raw wood or bare metal. The kind of primer you use depends on the kind of paint you'll be using later. For latex paint, use latex primers; for solvent-thinned paints, use solvent-base primers; and for metals, use metal primers. Not only do these coatings provide extra protection against the elements, they also form a firm foundation for finishing paints. Also, priming is always required when you're working on new wood.
Sand the trim with a fine-grit sanding sponge. Sponges get into crevices where sandpaper can’t go and let you apply even pressure. Then apply the ﬁrst coat of paint, let it dry at least 24 hours, lightly sand it again for a completely smooth surface, and apply the second coat. After each sanding, vacuum the trim, then wipe it down with a tack cloth to remove the dust.