Stacee, I agree with you completely, from adding water to latex paint to taking whites from job to job. This article makes all painters look like scam artists. You get what you pay for people! There is no denying that there are scammers out there but in my experience, most painters are under paid any ways so if you want a good paint job, you are going to pay for it. If you just want a new color on your walls real quick, and that is what you pay for then that's what you pay for people. Most painters get the crap end of the stick and are left with making an entire house look good when it took a lot more than a painter to build the house in the first place. Good painters do not get enough credit. They are not all scammers who are cutting corners!

exterior House Painters


Look for signs of a good contractor.Product knowledge and clear communication are the signs of a good contractor. “Look for a pro who recommends high-quality paints,” says Rance. “They should prioritize finish and durability over speed of application for a long-lasting paint job.” And, notes Bunting, a good contractor will respond to you in a timely manner.

painter Near Me


Work with a professional painting contractor. If you haven’t done so already, sign on to work with a painting company near you. As part of a professional team, you’ll learn the tricks of the trade and work in a variety of different environments, both commercial and residential. There’s no better way to accumulate practical experience than to do it on the job.[7]

NOTE: Member service professional information confirmed as described above may change or expire over time; while HomeAdvisor attempts to maintain accurate and up-to-date information, and confirms changes when notified, we cannot guarantee that profile and screening information is accurate. Therefore, we recommend that before working with a service professional you verify that information presented is still current and/or acceptable to you.

house Color Combination


To win work, contractors generally have to bid against other suppliers. To make an accurate bid, they estimate the time and materials required to complete the job. They measure the area to be painted and discuss the type of finish the customer requires. They assess the quality of the surfaces to work out how much remedial work they must carry out before painting. They might have to remove old paint or wall coverings, or repair cracks and other damage. They also calculate the cost of any essential equipment, such as scaffolding for exterior walls.
The Evolution System uses a 100% solids polyurea with unique technology that offers extreme adhesion, rapid cure, and maximum broadcast times. The vinyl flakes come in a variety of blends to mix and match with your choice of basecoat colors. This is one of the most popular systems for because of its wide variety of applications. Walk on in 4 hours & drive on in 24 hours.
Along the perimeter of a wall, where it meets the trim, the ceiling, and other walls, brush on a 1½- to 2-inch-wide stripe of the wall color. Painting that stripe, a process called cutting-in, puts paint in areas that a roller can’t easily reach. Next to trim and the ceiling, cutting-in also forms a crisp paint line that would be impossible with a roller alone. To get the best results, use long, steady strokes and a brush that isn’t overloaded with paint. Henrique prefers to cut-in with a 2½-inch-wide angled sash brush. For maximum control, he grips it at the ferrule, with his fingers as close to the bristles as possible. http://www.youtube.com/watch?v=b6_WEt9k_Hw&app=desktop
One of the most important steps in selecting a painting contractor is reading ratings and reviews. This is the best way to know exactly what to expect from the company, based on what others have posted. From quality of service to timeliness, there’s a lot you can learn about a company before working with them, solely from reading online reviews. And since these reviews are organic (not paid for by the company—hopefully), you can trust that they are honest and truly reflective of the painting contractor’s work.

© 2019 Condé Nast. All rights reserved. Use of this site constitutes acceptance of our User Agreement (updated 5/25/18) and Privacy Policy and Cookie Statement (updated 5/25/18) and Your California Privacy Rights. Architectural Digest may earn a portion of sales from products that are purchased through our site as part of our Affiliate Partnerships with retailers. The material on this site may not be reproduced, distributed, transmitted, cached or otherwise used, except with the prior written permission of Condé Nast. Ad Choices
Once you have removed all the loose paint, you should apply an appropriate primer to some of the distressed areas, especially if your paint-removal system has exposed raw wood or bare metal. The kind of primer you use depends on the kind of paint you'll be using later. For latex paint, use latex primers; for solvent-thinned paints, use solvent-base primers; and for metals, use metal primers. Not only do these coatings provide extra protection against the elements, they also form a firm foundation for finishing paints. Also, priming is always required when you're working on new wood.

cost Of Interior Painting


Hi Elaine, We would be happy to get you connected with a painting and wallpaper pro. You can submit a service request on our website: http://www.homeadvisor.com/ or browse reviews for local pros here: http://www.homeadvisor.com/c.html. We can also have a project advisor reach out to assist you if you send your contact information to [email protected] –HASupport

Pour some paint into the reservoir of a paint tray, dip the roller cover in, then distribute the paint evenly by rolling the cover over the ridged part of the tray. Bring the roller up to the wall, and using modest speed and a controlled motion, roll on a W shape to quickly get paint off the roller and onto the wall (A). Fill in the gaps and spread the paint film evenly over the entire 3- to 4-square-foot area (B), before going back to the pan for more paint. Repeat the process as you move across the wall, overlapping each section 30 to 40 percent over the previous area (C). Work from the top of the wall downward, to flatten any drips that occur. Don’t apply too much pressure—that will cause ridges of paint to form at the ends of the roller—and don’t worry if you can see through the first coat. “Focus on getting it smooth and even,” Henrique says, “and don’t try to stretch the paint.”
Calculate your costs.Having an idea of the cost of paint you need to purchase will help obtain quotes from a contractor. “Paint coverage is based on how many square feet of surface one gallon will cover,” says Bunting. “Most paints will cover approximately 400 square feet. Tally this by multiplying in feet the wall’s height by its width, minus windows and doors.” Determine how much paint is needed to complete the project. “To calculate the cost of a project, factor in the day rates, the size of the property, any architectural features, and the paint finish needed,” says Rance. 

how Much Do Home Painters Charge

×