Here is where this affects you as a consumer. You select a painter with a contract that says 2 coats, $500 down. You give the company the deposit and pick your colors a couple of days before the project starts. The painter goes to the store with your colors and figures out they are deep base. He (or she) not only needs to charge you more for the paint, but he also needs to charge you for a dark gray primer coat. Ninety nine percent of the time that primer coat is going to be really, really expensive since you already gave a deposit.
Work with a professional painting contractor. If you haven’t done so already, sign on to work with a painting company near you. As part of a professional team, you’ll learn the tricks of the trade and work in a variety of different environments, both commercial and residential. There’s no better way to accumulate practical experience than to do it on the job.
One of the most popular painting applications in the industry, ColorSnap suggests colors that will work in at your job site. Simply take a picture of the room, entryway or whatever else, and the software will find up to eight colors that will create a beautiful space. In addition, the program will suggest coordinating colors and help you locate the nearest Sherwin-Williams store.
Pour some paint into the reservoir of a paint tray, dip the roller cover in, then distribute the paint evenly by rolling the cover over the ridged part of the tray. Bring the roller up to the wall, and using modest speed and a controlled motion, roll on a W shape to quickly get paint off the roller and onto the wall (A). Fill in the gaps and spread the paint film evenly over the entire 3- to 4-square-foot area (B), before going back to the pan for more paint. Repeat the process as you move across the wall, overlapping each section 30 to 40 percent over the previous area (C). Work from the top of the wall downward, to flatten any drips that occur. Don’t apply too much pressure—that will cause ridges of paint to form at the ends of the roller—and don’t worry if you can see through the first coat. “Focus on getting it smooth and even,” Henrique says, “and don’t try to stretch the paint.”
Meet the pros. Call in at least three different contractors for your job. (Friends and family are good reference sources.) And be home for the initial meeting with them. That way, you’ll know how much time each contractor took to assess the condition of your home. The longer he takes, the more realistic the estimate you’ll get. Even an experienced painter will need more than a quick walk around your house. http://www.youtube.com/e/b6_WEt9k_Hw
After getting married and buying a home last year, Rebecca Brown figured her high-school summers painting houses would make her new DIY project a piece of cake. She finished some ceilings, but a few days—and a whole lot of blue tape—later, she realized that she needed help with the walls. “Back when I was painting, we used off-white on everything,” Rebecca says. “I had no experience choosing or working with different colors and sheens.” So she wrote to Ask This Old House. That’s how Mauro Henrique, who has been the painting contractor on about a dozen This Old House TV projects, ended up at her house, coaching her through the steps of refreshing her dining room.
You will want to use the highest quality exterior home paint your budget will allow for your project -- not only because it will look the nicest, but also because it will save you money in the long term by offering better coverage and durability. Better coverage means fewer coats and fewer work hours for your painter; better durability means that you won't have to spend money to paint the exterior of your home again in just a few years. How do you know how much paint you're paying for? Here's some helpful math:
The article and comments were great information to have before deciding how to go about getting a painting job done. I think the important point is that there are several key choices (who to do the work; color, sheen, quality, of paint; how many coats; amount of prep/repairs to be done and by whom, how long the job will take, provisions for changes, how detailed the contract needs to be; advanced deposit/progress payments/final payment; final inspection, etc.) that need to be made and it requires advanced research and planning in order to become well enough informed to make the right choices. Then it requires spending sufficient time to check materials and inspect the quality of the work while it is on-going, raher than waiting to do it all at the end. President Reagan's philosophy of "Trust, but verify." applies.
Once you’ve narrowed down the results to three to five choices, reach out to all of them to get a quote. Make sure you have all the details for the project, such as house size or any additional services you plan on asking for. This will give you a good sense of whether someone is over-charging you or what to expect as a general price range for the project.
You are right on with this - why do people leave switch plates on when it's just so easy to take them off? Another thing that happened to us - we had the popcorn ceiling taken off and the ceiling painted white. When the job was done and I later went to change out all the fixtures/fans, they had left every fixture in place, so there was a large patch of popcorn and unpainted ceiling left behind - it just didn't dawn on me to specify that they take those down before scraping and painting. It was kind of a mess.
Along the perimeter of a wall, where it meets the trim, the ceiling, and other walls, brush on a 1½- to 2-inch-wide stripe of the wall color. Painting that stripe, a process called cutting-in, puts paint in areas that a roller can’t easily reach. Next to trim and the ceiling, cutting-in also forms a crisp paint line that would be impossible with a roller alone. To get the best results, use long, steady strokes and a brush that isn’t overloaded with paint. Henrique prefers to cut-in with a 2½-inch-wide angled sash brush. For maximum control, he grips it at the ferrule, with his fingers as close to the bristles as possible.
After the paint has dried for at least 5 to 6 hours—or, ideally, overnight—use a utility knife to score around the edges of each pane, then pull off the rubbery masking membrane, as shown. Next, shut the windows, and reattach the window hardware, light fixtures, and electrical covers. Now remove the painter’s tape, rosin paper, and drop cloths. Latex paints don’t fully cure for one to two weeks, so clean the room slowly to avoid raising dust, and don’t rub or scrub the finish during that time. http://www.youtube.com/watch?feature=player_embedded&v=b6_WEt9k_Hw
Some proposals simply say to paint the walls and ceiling and never specify the number of coats to be applied. If the colors are similar enough, it's possible to get away with one coat of paint and not discount your pricing. No matter how hard you try, tiny, pin-sized air holes will pop exposing the original walls. This may not bother you if you can't notice it, but principally speaking you should have paid your painter less for the work.
When painting the trim, you don’t have to be neat. Just concentrate on getting a smooth finish on the wood. Don’t worry if the trim paint gets onto the walls. You’ll cover it later when painting the walls. Once the trim is completely painted and dry (at least 24 hours), tape it off (using an “easy release” painter’s tape), then paint the ceiling, then the walls.
This is an area that interior painters can easily cut short to save time. Most contracts don't state the extent of the wall repairs included, so it's up to the painter's discretion how much they will do. If it seems like too much work, they'll usually point out the repairs but don't include it in the bid. They'll then ask you if you'd like it fixed after they start your project and let you know how much more it will cost. http://youtube.com/watch?v=b6_WEt9k_Hw&app=desktop
Lighting can make a big difference in how your room looks. Lots of lighting, whether natural or artificial, is more likely to bring out the true color on the walls. On the other hand, a room with limited lighting could make a color appear darker than you wanted it to be. Make sure to account for the room’s lighting when you choose a color, and adjust your color choice if necessary.
professional House Painters
Removing and installing wallpaper can be a tricky task. The crew at CertaPro Painters® is skilled in removing wallpaper and will make this time-consuming task, hassle-free for you. We will work with you to help you choose a wallcoverings style that’s perfect for your home, and then apply it to your walls. All you’ll have to do is enjoy the final look.