Work with a professional painting contractor. If you haven’t done so already, sign on to work with a painting company near you. As part of a professional team, you’ll learn the tricks of the trade and work in a variety of different environments, both commercial and residential. There’s no better way to accumulate practical experience than to do it on the job.[7]
First off, the picture on the top THAT IS A HOME OWNERS PAINT JOB. If you here a school kid or your neighbor, this is what you get. I was a painting contractor for the better part of 40 years and never saw a PAINTER (even the worst painter) leave a mess like that. Maybe the electrician or the carpenter but, that is not something a painter could even do if they tried.

house Painting Colors


When hiring a contractor it is always best to hire one who is personally referred to you by someone you trust. Hiring through ads or phone book is hit and miss. Check with your local paints stores, they know the good guys from the bottom feeders. Go to the stores that sell the high quality paints like Benjamin Moore(nonpareil), Pittsburg, Sherwin Williams or Glidden. Don't go the the big box stores for referrals, the people there don't know squat!

how To Choose Exterior Paint Colors For Your House


"Jose was amazing! I had asked for just a quote on a texturing job, and he was over within the hour. Not only did he give me a great quote, but he was able to fit the work in for me that day. He did such a great job mudding and texturing (and really fast for how perfect it came out), that I asked if he could paint the same room and the exterior of my garage as well. He happily agreed and finished all of this in one afternoon! All of my neighbors were impressed. He even went to work on another job while the texture was drying to maximize time. Such a hard worker. He is the man. I definitely kept his number handy for my next project & won't hesitate to call him again. I'd recommend him to anyone."
Project management is important for contracted painting jobs because it helps with communication and lowers the chance of complaints.  The fact is, contracting is the #1 source of consumer complaints in the state and project management is what triggers most calls to the State Contractor’s License Board and the Better Business Bureau. With a proper project management system in place, these complaints can be avoided and your job will be completed the right way.
This was very helpful. I wonder if i would really follow through and check to see if my painter was cheating me. I used a painter I found on Angie's List. This was 5 years ago. He did a great job. I know he did patching only for about a day and a half. We decided on the kind of paint before he started. that is what he used. I don't know if I could stay on top of him and watch him open every can of paint.
Painting contractors work in the property maintenance sector. Depending on their skills and resources, they might specialize in painting different types of buildings, including houses and apartments, or commercial properties, such as offices, factories or retail outlets. Some contractors work directly for property owners; others find work through real estate firms, rental agents and property maintenance companies.
Professional painters provide estimates primarily based on the square footage of your home. Painting an average home between 500 and 1,500 square feet can cost between $1,000 and $3,000. However, factors such as number of stories and ease of access can also affect the overall price. Homeowners report that the average cost to paint a house nationally is $2,581 and most pay between $1,714 and $3,682.
Use a wire brush and a wide-blade putty knife to remove small areas of defective paint. Scrub under the laps of clapboard siding as well as on downspouts and gutters. For speedier work on metal, a wire brush attachment on an electric drill will remove rust and paint with less effort. For more extensive paint removal, invest in a sharp pull scraper -- a tool with a replaceable blade that's capable of stripping old paint all the way down to bare wood with a single scrape. Hold the scraper so the blade is perpendicular to the wood, apply moderate to firm pressure, and drag it along the surface. Keep the blade flat against the wood so it doesn't gouge the surface.
I'm an architect and my firm routinely specifies interior finishes for projects so I thought I'd contribute a professional's perspective on the issue of how many coats of paint are deemed "acceptable". The fact of the matter is the average consumer usually isn't a paint expert and can't be expected to know about all the factors that impact coverage. That knowledge is considered "means and methods" and in a court of law, the responsibility lies with the painter or general contractor, not the consumer. What the consumer should be concerned about is the final result-does it look good and is it what you expected? The simplest way to communicate this to your painter is to stipule in your written agreement that the number of coats will be "as required to cover". That way all the guess work about what kind of primer, how many coats, how color affects the scope of work, etc., is removed from the consumer's responsibility and resides where it belongs-with the professional. In the contract that's why retention is always a good idea-typically 10% is withheld from payment until the job is completed to the satisfaction of the customer. Of course in return you as the customer have to be reasonable about what constitutes a completed job. Just my $.02.
I am a painting contractor and have been since 2001. Make sure the estimate provides in writing: What is EXCLUDED as well as INCLUDED. It should state the manufacturer and type of paint going to be used. Estimate says ALL LABOR AND MATERIALS. My estimates to my customers say "guaranteed coverage" eliminates the conversations of 1 coat vs 2 coat. I have my customers submit colors 5 days prior to start date. Customers need to inform me if they are going to use pure white, dark reds, oranges, and bright yellows they need to inform me in that 5 day window, so I can adjust my pricing for 3 coats. Although this more uncommon now than years past because a lot of paint manufacturers have primer with paint products. Let the contractor know if your doing accent walls. This takes longer to cut in straight lines and it requires the contractor to purchase more paint. If you add anything on the scope of work have the painter write out the description and cost prior to them doing the work. Have the estimate say how many days it will take to perform the work. Ask how many workers will be doing the job. Make sure to enforce that number of workers their everyday until the job is complete. Do not give final payment until you do a final walk through. Walk the job when its almost complete and point out areas that you want fixed prior to the contractors final walk through. Its best to do while the workers are still in that particular area as they will have tarps down and areas covered and it will be easier for them to take care of. Purchase a roll of blue tape and stick it to areas that you want fixed. This is called a punch list.
Marketing is the lifeblood of your business. Without marketing there can be no prospects, no appointments and no projects. Marketing is what makes the register ring. In order to be truly successful in the residential painting business, you must be a marketing expert. You can be average at everything else, but if you use marketing, you will make a ton of money.
Increase sale value: If you’re considering selling your house in the near future, a new coat of paint has the potential to increase the value of your home. Not only will a fresh paint job make your place look updated and clean, but it will also cover up any scratches, chips or other flaws that may be on your walls. You’ll be able to get more money for a house that has already had minor renovations like this completed.
Once you have removed all the loose paint, you should apply an appropriate primer to some of the distressed areas, especially if your paint-removal system has exposed raw wood or bare metal. The kind of primer you use depends on the kind of paint you'll be using later. For latex paint, use latex primers; for solvent-thinned paints, use solvent-base primers; and for metals, use metal primers. Not only do these coatings provide extra protection against the elements, they also form a firm foundation for finishing paints. Also, priming is always required when you're working on new wood.
Research the licensing requirements for your area. These laws governing professional contractor work will be different depending on where you live. It’s important to be aware of these laws and what they mean from the outset. Contact the licensing board for your state or district to find out more about what you’ll need to do to get your business off the ground.

how Much To Paint Contractor

×