Lighting can make a big difference in how your room looks. Lots of lighting, whether natural or artificial, is more likely to bring out the true color on the walls. On the other hand, a room with limited lighting could make a color appear darker than you wanted it to be. Make sure to account for the room’s lighting when you choose a color, and adjust your color choice if necessary. http://m.youtube.com/watch?v=b6_WEt9k_Hw
Stacee, I agree with you completely, from adding water to latex paint to taking whites from job to job. This article makes all painters look like scam artists. You get what you pay for people! There is no denying that there are scammers out there but in my experience, most painters are under paid any ways so if you want a good paint job, you are going to pay for it. If you just want a new color on your walls real quick, and that is what you pay for then that's what you pay for people. Most painters get the crap end of the stick and are left with making an entire house look good when it took a lot more than a painter to build the house in the first place. Good painters do not get enough credit. They are not all scammers who are cutting corners!
"Out of the 3 contractors I contacted to bid my drywall project, Everitt was the only one who showed up on time, communicated clearly and provided a bid when he said he would. The others either showed up late, wanted to play games or asked for me to disclose other bids so they could low bid their project. I have no time for that type of business. To say that I am very thorough and OCD would be an understatement. Everitt never lost patience with me, always answered my questions and answered my calls or texts within a few minutes. His work was superior!!! He worked hard, on weekends, evenings whatever it took to get my job done in time for us to be able to move in by our upcoming deadline. I started off just hiring him for drywall but, later in the process had him paint, do trim work and install vinyl plank and laminate flooring. I highly recommend Everitt for your project. He is a guy of integrity, hard work and attention to detail. He went above and beyond what I expected. You will not be disappointed! Great Job!"
These days, it seems like anyone with a paintbrush and a business card can call themselves a painting contractor. Homeowners who are most likely to be taken in by these unscrupulous “painters” are those who are focused on cost and cost alone. With painting, like anything else in life, you typically get what you pay for. If the painting contractor you are considering cannot answer these ten questions, proceed at your own risk. If they answer all ten satisfactorily, then you know you’ve found a great great professional contractor to work with.
I was a painting contractor for many years and never asked for a deposit upfront. A good contractor should have great credit with his suppliers and an even better contract if the deal should go south before the job is done. Get to know your customer and explain how each paint covers so they understand fully before you have to apply 3 or 4 coats. If you didn't bid your job right and the client has already signed the contract then that is on you not the client. Yes I haven had to eat the difference but the client was happy and a return customer for years so I made up for it.
It seems that private contractors are not currently being used for large-scale painting or construction jobs in Ghana. These projects are typically handled by agencies who receive contracts directly from the government. However, national regulations are constantly changing, and private contractors may be able to bid on high profile projects in the near future.
This is an area that interior painters can easily cut short to save time. Most contracts don't state the extent of the wall repairs included, so it's up to the painter's discretion how much they will do. If it seems like too much work, they'll usually point out the repairs but don't include it in the bid. They'll then ask you if you'd like it fixed after they start your project and let you know how much more it will cost.
to be the devils advocate i have been a building contractor 20 of the last 30 yrs. i do know that if you go to a higher sheen of paint and or darker colors then any imperfections in the walls will show up much more dramatically…therefore the painter or a good drywall finisher is needed to prepare the walls extensively. this could cause more expenses…for it takes a lot of time to prep walls (smooth walls..not textured walls) and this cost has to be absorbed.
Along the perimeter of a wall, where it meets the trim, the ceiling, and other walls, brush on a 1½- to 2-inch-wide stripe of the wall color. Painting that stripe, a process called cutting-in, puts paint in areas that a roller can’t easily reach. Next to trim and the ceiling, cutting-in also forms a crisp paint line that would be impossible with a roller alone. To get the best results, use long, steady strokes and a brush that isn’t overloaded with paint. Henrique prefers to cut-in with a 2½-inch-wide angled sash brush. For maximum control, he grips it at the ferrule, with his fingers as close to the bristles as possible. http://www.youtube.com/watch?v=b6_WEt9k_Hw&app=desktop
After the paint has dried for at least 5 to 6 hours—or, ideally, overnight—use a utility knife to score around the edges of each pane, then pull off the rubbery masking membrane, as shown. Next, shut the windows, and reattach the window hardware, light fixtures, and electrical covers. Now remove the painter’s tape, rosin paper, and drop cloths. Latex paints don’t fully cure for one to two weeks, so clean the room slowly to avoid raising dust, and don’t rub or scrub the finish during that time. http://www.youtube.com/watch?feature=player_embedded&v=b6_WEt9k_Hw
The house bath may reveal nails that have popped out of the siding or rusting nail heads that have left streaks of rust on exterior walls. If so, use sandpaper or steel wool to clean the nail heads. On clapboard siding, use a nail set to recess the nail head about ⅛ inch below the surface of the wood. Dab on a coat of rust-inhibiting primer (unless the nail is aluminum or nonrusting galvanized steel), and let it dry. Then fill the nail hole with spackle or putty. When the filler is dry, give it a coat of primer. For flathead nails, which cannot be recessed, sand the heads until they're shiny, and coat with primer.
Yes the pricing does change, and quite significantly. I have worked inside the paint industry on counter sales outside sales and application for over 10 years. One thing many people do not understand is, the resins in the paint are more expensive to produce the higher the sheen goes. Therefore the company is at of higher cost making the paint, which in terms they charge more for the paint. I have seen a 15$ variance between flat-semi-gloss it is not uncommon and is not unrealistic to pay more for a higher sheen. Another thing to add is when doing samples on your wall prior to a painter coming is a good idea, however do not do them in huge squares with heavy coats, remember you are just wanting an idea. A lot of times the issue comes up of the paint not covering the sample coats, in fact it is covering quite well, however the paint sample applied is often times much darker than the wall color, creating a contrasting difference from the lighter surrounding wall and the sample placed on the wall. I recommend getting a piece of sheet rock and using it for the samples so you can move around with it etc.
Every home has details that can be accentuated for amazing looking visual appeal and first impressions. The key is to not make the wrong details stand out. Entryways, windows, shutters and other details on the home can be painted to make their design noticeable. However features such as gutters, downspouts, external air conditioning systems, unevenly proportioned windows and protruding garage doors should not be completed to draw attention to them as this will provide a negative results.
Start by thoroughly examining the outside of the house or outbuilding -- not just the exterior walls but under the eaves, around windows and doors, and along the foundation. Look for split shingles and siding, popped nails, peeling or blistering paint, mildew, and rust stains. Once you've identified the areas that need attention, roll up your sleeves and make the repairs.