You are right on with this - why do people leave switch plates on when it's just so easy to take them off? Another thing that happened to us - we had the popcorn ceiling taken off and the ceiling painted white. When the job was done and I later went to change out all the fixtures/fans, they had left every fixture in place, so there was a large patch of popcorn and unpainted ceiling left behind - it just didn't dawn on me to specify that they take those down before scraping and painting. It was kind of a mess.

My husband has been a professional painter over 30 years. He prides himself in his high level of work ethic and customer satisfaction. He stays up to date on techniques and finishes. He gives Very detail and accurate appraisals with contracts. At an alarming rate, as he starts to finish the last day or the day before, the client starts nit picking and being disrespectful towards his work when every day prior to that, they were very pleased, as he request ongoing satisfaction throughout the job. Then they don't to want pay remaining balance, bicker about final cost, or stop payment. He has a crew he has to pay whether the customer does or doesn't honor the contract as well as our own household expenses. Wasted time ,labor, money and effort lost. Now how do we fix this? Remind yourself and clients that a contract is based on honor.
When calculating total cost of your project, one of the most important factors to consider is the paint itself. Paint costs will be determined by the quantity of paint and primer required to complete your project, as well as the quality of the paint you choose. You can use this paint calculator to estimate how much paint you will need.. Once you have an idea what you're working with, go to your local home improvement store and compare the costs of a gallon in person. Painting professionals can also quote average prices from their years of experience working with different paint qualities.

For particularly heavy deposits of paint, heat may be more effective than muscle. One way to apply heat is with an electric paint remover, which is a device with a platelike heating element that "cooks" the paint and has a built-in scraper to pull it off. Wearing heavy gloves, hold the heating element against the surface until the paint sizzles. Pull the remover firmly over the surface. The attached scraper will pull off the cooked paint as you go.
Get the right sheen: A coating’s ability to reflect light ranges from high gloss, the shiniest and most washable, to flat or matte, which has no luster and is tough to clean. High gloss is unforgiving to apply—every brushstroke is visible—so Henrique uses semigloss for trim, windows, and doors. Satin has a bit less luster and plenty of durability, making it a great choice for cabinetry. Low-sheen eggshell is Henrique’s pick for walls. Flats and mattes, while great at hiding imperfections, are more easily stained, scratched, and dinged; they’re best on ceilings.
You will want to use the highest quality exterior home paint your budget will allow for your project -- not only because it will look the nicest, but also because it will save you money in the long term by offering better coverage and durability. Better coverage means fewer coats and fewer work hours for your painter; better durability means that you won't have to spend money to paint the exterior of your home again in just a few years. How do you know how much paint you're paying for? Here's some helpful math:
Calculate your costs.Having an idea of the cost of paint you need to purchase will help obtain quotes from a contractor. “Paint coverage is based on how many square feet of surface one gallon will cover,” says Bunting. “Most paints will cover approximately 400 square feet. Tally this by multiplying in feet the wall’s height by its width, minus windows and doors.” Determine how much paint is needed to complete the project. “To calculate the cost of a project, factor in the day rates, the size of the property, any architectural features, and the paint finish needed,” says Rance.
Interview your contractor.Before you choose a contractor, get three bids for comparison and ask the right questions. Bunting says you need to know the following: Do they have proper licenses, insurance, and bonding? Do they subcontract the work out? Do they offer written guarantees of their work? “Recommendations from friends and family are always a good measure,” adds Rance. “And ask for references from previous customers.”

professional Painters Near Me


The walls must be properly cleaned prior to applying primer or paint. This involves using a mixture of soap and water. Nail holes, chips, cracks or other small imperfections should be filled in and evened with plaster and allowed to dry before the entire surface is lightly sanded down and wiped again. Once the wall is clean and dry, you should apply painter’s tape over surfaces you do not want painted. Be sure not to overlook ceiling corners and edges, baseboards and trims and moldings.
I'm an architect and my firm routinely specifies interior finishes for projects so I thought I'd contribute a professional's perspective on the issue of how many coats of paint are deemed "acceptable". The fact of the matter is the average consumer usually isn't a paint expert and can't be expected to know about all the factors that impact coverage. That knowledge is considered "means and methods" and in a court of law, the responsibility lies with the painter or general contractor, not the consumer. What the consumer should be concerned about is the final result-does it look good and is it what you expected? The simplest way to communicate this to your painter is to stipule in your written agreement that the number of coats will be "as required to cover". That way all the guess work about what kind of primer, how many coats, how color affects the scope of work, etc., is removed from the consumer's responsibility and resides where it belongs-with the professional. In the contract that's why retention is always a good idea-typically 10% is withheld from payment until the job is completed to the satisfaction of the customer. Of course in return you as the customer have to be reasonable about what constitutes a completed job. Just my $.02. http://youtube.com/v/b6_WEt9k_Hw?version=3
First off, the picture on the top THAT IS A HOME OWNERS PAINT JOB. If you here a school kid or your neighbor, this is what you get. I was a painting contractor for the better part of 40 years and never saw a PAINTER (even the worst painter) leave a mess like that. Maybe the electrician or the carpenter but, that is not something a painter could even do if they tried.

house Painting Colors


Stacee, I agree with you completely, from adding water to latex paint to taking whites from job to job. This article makes all painters look like scam artists. You get what you pay for people! There is no denying that there are scammers out there but in my experience, most painters are under paid any ways so if you want a good paint job, you are going to pay for it. If you just want a new color on your walls real quick, and that is what you pay for then that's what you pay for people. Most painters get the crap end of the stick and are left with making an entire house look good when it took a lot more than a painter to build the house in the first place. Good painters do not get enough credit. They are not all scammers who are cutting corners!

exterior House Painters


A fellow (actually lives in the same neighborhood) by the name of Wayne Hickey (843-655-0366) painted the ceilings and most of the walls of our house in February 2017. He got paint all over my light fixtures, all over my trim around the doors, and had visible lap marks everywhere on the walls. He came back and rectified some of the problems, but not all, as I have noticed as I have had time to look more carefully at the work he and his assistant did. His assistant had no idea (not a clue) how to roll paint on a wall or ceiling. Some places were not covered. He said he would pull nails for pictures and then re-insert the nails exactly where they were. This he did not do as he promised. He painted over the nails. His assistant had no idea how to use a paint roller. I have painted all my life, and would have done this work myself, but I just had a full knee replacement and the other knee is in bad shape. I just could not do the work. Wayne is a pleasant and congenial individual, but he can not cut in a ceiling or wall to my satisfaction - not even close. He should have a putty knife and wet cloth with him all the time to correct any paint that might get applied where it shouldn't. That is something I always did as a painter. I would not recommend Wayne to paint anybody's home.
Mauro Henrique was working on a construction crew, hoping to become a carpenter, when one day in 1991 the painter didn’t show up. “The contractor looked at me and said, ‘Can you paint?’ I shrugged, picked up a brush—and found my trade.” For Henrique, the big appeal of painting is how fast he and his crew can transform a client’s house. “I get to make people happy every day.”
This was very helpful. I wonder if i would really follow through and check to see if my painter was cheating me. I used a painter I found on Angie's List. This was 5 years ago. He did a great job. I know he did patching only for about a day and a half. We decided on the kind of paint before he started. that is what he used. I don't know if I could stay on top of him and watch him open every can of paint.

house Painting Designs


The Evolution System uses a 100% solids polyurea with unique technology that offers extreme adhesion, rapid cure, and maximum broadcast times. The vinyl flakes come in a variety of blends to mix and match with your choice of basecoat colors. This is one of the most popular systems for because of its wide variety of applications. Walk on in 4 hours & drive on in 24 hours.
Sand the trim with a fine-grit sanding sponge. Sponges get into crevices where sandpaper can’t go and let you apply even pressure. Then apply the first coat of paint, let it dry at least 24 hours, lightly sand it again for a completely smooth surface, and apply the second coat. After each sanding, vacuum the trim, then wipe it down with a tack cloth to remove the dust.

exterior Home Painting Near Me

×